An advanced meshless technique for large deformation analysis of metal forming

The large deformation analysis is one of major challenges in numerical modelling and simulation of metal forming. Although the finite element method (FEM) is a well-established method for modeling nonlinear problems, it often encounters difficulties for large deformation analyses due to the mesh distortion issues. Because no mesh is used, the meshless methods show very good potential for the large deformation analysis. In this paper, a local meshless formulation is developed for the large deformation analysis. The Radial Basis Function (RBF) is employed to construct the meshless shape functions, and the spline function with high continuity is used as the weight function in the construction of the local weak form. The discrete equations for large deformation of solids are obtained using the local weak-forms, RBF shape functions, and the total Lagrangian (TL) approach, which refers all variables to the initial (undeformed) configuration. This formulation requires no explicit mesh in computation and therefore fully avoids mesh distortion difficulties in the large deformation analysis of metal forming. Several example problems are presented to demonstrate the effectiveness of the developed meshless technique. It has been found that the developed meshless technique provides a superior performance to the conventional FEM in dealing with large deformation problems in metal forming

Cross section design of holey optical fibers with coating based on stress analysis in tension

In this paper, the mechanical behavior of newly developed holey optical fibers with and without coating was investigated by numerical analysis. Based on experimental work, the tensile failure characteristics were observed. The stress characteristics of some typical holey fibers with different section design were studied though the finite element method under tensile load. The optimum design of air hole arrangements and sizes were proposed according to the numerical results. The influence of the coating thickness on the axial stress of holey optical fiber was also investigated. The numerical results and conclusions will be useful for the cross section optimum design of holey optical fiber for increase its strength

Porous zirconia scaffold modified with mesoporous bioglass coating

Porous yttria-stabilized zirconia (YSZ) has been regarded as a potential candidate for bone substitute as its high mechanical strength. However, porous YSZ bodies are biologically inert to bone tissue. It is therefore necessary to introduce bioactive coatings onto the walls of the porous structures to enhance the bioactivity. In this study, the porous zirconia scaffolds were prepared by infiltration of Acrylonitrile Butadiene Styrene (ABS) scaffolds with 3 mol% yttria stabilized zirconia slurry. After sintering, a method of sol-gel dip coating was involved to make coating layer of mesoporous bioglass (MBGs). The porous zirconia without the coating had high porosities of 60.1% to 63.8%, and most macropores were interconnected with pore sizes of 0.5-0.8mm. The porous zirconia had compressive strengths of 9.07-9.90MPa. Moreover, the average coating thickness was about 7μm. There is no significant change of compressive strength for the porous zirconia with mesoporous biogalss coating. The bone marrow stromal cell (BMSC) proliferation test showed both uncoated and coated zirconia scaffolds have good biocompatibility. The scanning electron microscope (SEM) micrographs and the compositional analysis graphs demonstrated that after testing in the simulated body fluid (SBF) for 7 days, the apatite formation occurred on the coating surface. Thus, porous zirconia-based ceramics were modified with bioactive coating of mesoporous bioglass for potential biomedical applications